Soft Arkansas BenchStone 8" x 2 ", Lansky

Soft Arkansas Sharpening Stone (8" x 2") Lansky

Soft Arkansas Sharpening Stone is an essential component in any knife sharpening kit. Providing a coarse grit (approx. 200-350 Grit), this stone is typically used to start the knife edge before finishing with a finer grit (Harder Arkansas) stone.

Ideal for chisels, planer blades, axes and other large tools. The Soft Arkansas Bench Stone is one of the most versatile hones for general purpose sharpening. The base comes with non-slip rubber frame.

INSTRUCTIONS

1. Select the proper stone for your edge.
   • Soft - to maintain an already sharp edge
   • Hard - to hone/polish a finished edge
2. Set the stone on a stable, flat surface.
3. Lubricate the stone’s surface using Nathan’s Honing Oil®.
4. Observe the bevel angle on the blade you intend to sharpen.  Then, bring the edge to the stone matching your sharpening angle to the bevel angle.
5. Using light pressure, push the edge of the blade across the stone in one motion, much like trying to slice a thin layer off the top of the stone. Maintaining a consistent angle is essential for the best results.
6. Repeat process 3-4 times on one side of the blade, then switch to the other side and repeat.
7. Repeat this process until edge is sharp.
8. Make sure to clean your stones after each use. Store in a cool dry place.

SUGGESTIONS

• Use a series of stones for the best results. Coarse -> Medium (Soft) -> Fine (Hard) -> Extra Fine. 
• Start with 3-4 strokes per side. Repeat this process 3-4 times. 
• Then 2 strokes per side. Repeat this process 2-3 times. 
• Then 1 stroke per side. Repeat this process 1-2 times.
• Then move on to a finer (=harder) Arkansas stone.

Be Smart, Be Safe and Stay an Edge Above the Rest!

CAUTION: Knife sharpening is an inherently dangerous activity. Used properly this sharpener cannot hurt you but a carelessly handled blade or pointed object can.