Eliminator Bore Cleaner, 473 ml, BoreTech

BORETECH ELIMINATOR BORE CLEANER

The revolutionary patented BoreTech Eliminator bore cleaner, whose composition is dramatically different from other cleaners that have been used in the past to clean guns.

The great advantage of the BoreTech Eliminator is that it is able to dissolve and clean fired carbon deposits as well as copper abrasion caused by shooting.

The Eliminator specifically targets the chemical dissolution and release of carbon from the bore surface. Its chemical composition promotes a chemical reaction that greatly shortens and facilitates mechanical cleaning. There is no need to perform as many mechanical cleaning procedures with bronze brushes and wipers as with conventional products.

The cleaning process is a two-step process. The eliminator first breaks down the copper plating in the barrel and changes its electrolytic properties. It then uses a specially developed bonding agent to bind the copper residue so that it does not continue to accumulate in the barrel bore. And then it continues to dissolve the carbon in undiluted form so that the effectiveness of the chemical cleaning does not decrease.

Another advantage of Eliminator is that it contains rust inhibitors that help protect your gun even after cleaning - just run the barrel through with Eliminator one last time after the cleaning procedure to protect your barrel against rust and corrosion.

MAIN FEATURES OF BORETECH ELIMINATOR

• eliminator quickly dissolves carbon, lead, copper and corrosive residues
• it doesn't matter if your barrel is from high carbon steel or stainless steel
• eliminator is 100% bore safe, odorless, non-hazardous, environmentally friendly
• highly regarded brand among professionals
• 100% barrel safe
• odourless
• 100% environmentally degradable
• no ammonia
• prevents corrosion in the short term
• non-flammable
• packaged in chemically resistant rigid bottles
• teist-on closure

TECHNICAL PARAMETERS OF BORETECH ELIMINATOR

• carbon dissolving (carbon cleaner): yes
• copper remover: yes
• lead dissolution (lead remover): yes
• dissolving moly (moly cleaner): yes
• plastic dissolving (plastic remover): no

INSTRUCTIONS FOR USE

1. Unload the firearm
2. Wet 3 to 4 cotton wipers (patches) with ELIMINATOR compound and pull through the barrel to remove debris. Pull through the barrel in ONE direction only.
3. Next, pull 10 to 15 times with a stiff nylon brush dipped in ELIMINATOR.
4. Then repeat step 1 and allow the mixture to work for 3 to 5 minutes.
5. Finally, pull patches through the barrel until they start to come out completely clean.
6. Before storing the firearm for long periods of time, wet the wiper with the ELIMINATOR compound and pull the barrel through, as the compound contains short-term anti-corrosion particles.
7. Always ensure that the barrel is dry before using the firearm again. This will remove any remaining particles and prevent clogging.

BoreTech Eliminator is without a doubt a premium product, a top of the line cleaner recognized by industry professionals that will greatly speed and streamline the cleaning procedure, cleaning both copper and carbon residue. It is non-toxic, free of hazardous impurities, and odorless.